FREE SHIPPING on product purchases of $75 or more anywhere in CANADA.
If the shop doesn’t load, click on any category in the shop menu at the top of the page.
You can then navigate through the breadcrumb if needed.
Varnish High Gloss 4oz Liquitex
Product Details
Brand: Liquitex
Seal your acrylic work with a transparent, high gloss acrylic layer which is breathable, permanent and protects against UV damage.
What it does
- 100% acrylic polymer varnish adds a high gloss sheen, protects and resists dirt retention.
- Dries clear to a flexible, non-tacky, hard surface.
- Increases brightness and color saturation.
- Adjusts and unifies surface sheen.
- Improves surface durability - ideal when shipping or exhibiting.
- Protects colors from UV light damage.
- Resists discoloration - yellowing and fogging - caused by humidity, heat and UV.
- Depending on the substrate it allows surface moisture to pass through and breathe.
- Allows for easy cleaning without fear of damaging the acrylic paint film.
- Has excellent levelling properties - will not hold brush marks.
- Semi-opaque when wet, transparent when dry.
- Use on flexible or rigid supports.
- Designed for interior and exterior use.
How to use it
- As this is permanent, do a patch test first.
- Before varnishing ensure paint surface is fully dry (72 hours-two weeks depending on thickness).
- Ensure your space is well ventilated and dirt and dust-free.
- Place the artwork flat on a surface - always varnish horizontally.
- Stir gently before use.
- Use long, even strokes, covering the surface top to bottom while moving from one side to the other - don't go over bits you have missed but leave to dry and then re-varnish area.
- While applying, look for surface bubbles and even them out immediately.
- Apply up to three thin coats, allowing at least three hours dry time between coats.
How not to use it
- Do not shake or vigorously over-brush as this can result in surface bubbles and a foggy, hazy look when dry.
- Don't apply with a roller or sponge brush.
- Don't thin with water.
- Don't apply in one thick coat, but several thin coats, to avoid brush marks, drips and cloudiness.
- Don't go back over areas you have already done, as this can cause clouding.
- Don't attempt to remove once applied.
- Do not use with any non-acrylic media.
What it does
- 100% acrylic polymer varnish adds a high gloss sheen, protects and resists dirt retention.
- Dries clear to a flexible, non-tacky, hard surface.
- Increases brightness and color saturation.
- Adjusts and unifies surface sheen.
- Improves surface durability - ideal when shipping or exhibiting.
- Protects colors from UV light damage.
- Resists discoloration - yellowing and fogging - caused by humidity, heat and UV.
- Depending on the substrate it allows surface moisture to pass through and breathe.
- Allows for easy cleaning without fear of damaging the acrylic paint film.
- Has excellent levelling properties - will not hold brush marks.
- Semi-opaque when wet, transparent when dry.
- Use on flexible or rigid supports.
- Designed for interior and exterior use.
How to use it
- As this is permanent, do a patch test first.
- Before varnishing ensure paint surface is fully dry (72 hours-two weeks depending on thickness).
- Ensure your space is well ventilated and dirt and dust-free.
- Place the artwork flat on a surface - always varnish horizontally.
- Stir gently before use.
- Use long, even strokes, covering the surface top to bottom while moving from one side to the other - don't go over bits you have missed but leave to dry and then re-varnish area.
- While applying, look for surface bubbles and even them out immediately.
- Apply up to three thin coats, allowing at least three hours dry time between coats.
How not to use it
- Do not shake or vigorously over-brush as this can result in surface bubbles and a foggy, hazy look when dry.
- Don't apply with a roller or sponge brush.
- Don't thin with water.
- Don't apply in one thick coat, but several thin coats, to avoid brush marks, drips and cloudiness.
- Don't go back over areas you have already done, as this can cause clouding.
- Don't attempt to remove once applied.
- Do not use with any non-acrylic media.
